Cable Idc Socket
 |
 16 POSITION Flat Cable IDC Socket Connector X 600pcs  US $189.99
|
 10 POSITION Flat Cable IDC Socket Connector X 1000pcs US $129.99
|
 100 9 Pin IDC Ribbon Cable DB9 Female Socket Connector US $99.95
|
 10 POSITION Flat Cable IDC Socket Connector X 500pcs US $75.99
|
 16 POSITION Flat Cable IDC Socket Connector X 150pcs US $49.99
|
 20 POSITION Flat Cable IDC Socket Connector X 100pcs US $39.99
|
 10 pin flat cable IDC Socket x 200pcsTin Plated US $32.99
|
 50pcsFlat cable connector 2mm0079 IDC SOCKET 10Pin 2x5Pin US $24.99
|
 14 POSITION Flat Cable IDC Socket Connectors X 100pcs US $23.99
|
 6 socket IDC SPI Shield Free TWO 6pin Cables Arduino compatible US $16.55
|
 14 POSITION Flat Cable IDC Socket Connectors X 50pcs US $14.99
|
 10 3M 3421 7000 20pos IDC Ribbon Cable Sockets US $12.99
|
 10 pin Flat Cable IDC Socket x 50pcsTin Plated US $11.99
|
 10pcsFlat cable connector 2mm0079 IDC SOCKET 40Pin 2x20Pin US $10.99
|
 14 PIN IDC JUMPER CABLE SOCKET CONNECTOR OCTOPUS MODEM US $10.99
|
 16 POSITION Flat Cable IDC Socket Connector X 30pcs US $10.59
|
 10pcsFlat cable connector 2mm0079 IDC SOCKET 34Pin 2x17Pin US $9.99
|
 10pcsFlat cable connector 2mm0079 IDC SOCKET 6Pin 2x3Pin US $9.99
|
 6 X 9 Pin IDC Ribbon Cable DB9 Male Socket Connector US $9.95
|
 6 X 9 Pin IDC Ribbon Cable DB9 Female Socket Connector US $9.95
|
 20 POSITION Flat Cable IDC Socket Connectors X 20pcs US $8.50
|
 Connector 5 pcs IDC SOCKET 14 PINS 254 mm Flat Cable US $3.20
|
 40 Ways Flat Ribbon Cable For 254mm 2x20 array IDC Socket1meter US $3.00
|
 10 Pin IDC socket connector 20cm flat cable assembly US $2.95
|
 IDC Cable Mounting Socket Connector 26 Way Pack of 5 US $1.56
|
 IDC Cable Mounting Socket Connector 40 Way Pack of 4 US $1.56
|
 IDC Cable Mounting Socket Connector 50 Way Pack of 3 US $1.56
|
 10 Ways Flat Ribbon Cable For 254mm 2x5 array IDC Socket1meter US $1.00
|
Fault finding on BT Master Telephone Socket?
Here's a puzzle - I have a standard NTE5 BT Master socket to which I have a telephone & Broadband Home Hub connected. All works fine. The minute I connect wires to the IDC terminals on the back of the socket (for an extension socket) the Broadband drops out! I am following the standard wiring guide with blue/white on No.2 terminal & white/blue on No.5 terminal (the rest aren't needed) & the Broadband drops out even with only a 1 metre length of cable connected regardless of whether I terminate in the extension socket or not. Micro filters make no difference to the problem. Any ideas?? Could I try running the extension socket direct off the "A" & "B" incoming drop wiring?
if wiring extension sockets the oher wires are needed 1=Green, 2= Blue, 3= Orange, 4= White with Orange, 5= White with Blue, 6=White with Green.
The Blue and Orange are needed for extension lines and the Green as well for PABX or home network lines.
also make sure the cut end of the cable isn't touching and shorting out... also check that the secondary socket has a filter attached to it (broadband) and the far end are not reversed...
New 3M 2mm Ribbon Cables
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.