Tnc Jack
 |
 Lot of 10 Adapter N Plug TNC Jack 33N TNC 50 1  US $110.00
|
 Lot of 5 Adapter N Plug TNC Jack 33N TNC 50 1 US $55.00
|
 Amphenol 79075 TNC Angle Jack US $53.99
|
 41 NEW Amphenol 31 5607 RF Connector TNC Right Angle Jack PCB Mount 50ohm US $24.99
|
 10 Connex TNC Jack Crimp 50 Ohm 122138 RF Connectors US $19.99
|
 TNCf To Banana Jack Telescoping Line US $17.95
|
 Amphenol 79675 Coaxial RF Adapter BNC Jack to TNC Plug NEW Only a Few Left US $16.95
|
 3LOT ASTROLAB TNC JACK 29715F 32 46 FLANGE MOUNT NEW US $15.99
|
 Adapter N Plug TNC Jack 33N TNC 50 1 US $15.00
|
 5 8 TNCM to 25mm Headphone Jack Cables US $10.79
|
 AEP TNC BULKHEAD JACK to SMB MALE JACK ADAPTER NEW US $9.99
|
 Assorted TNC Female Straight Jack 5pcs US $9.99
|
 Assorted BNC TNC Female Straight Jack 5pcs US $9.99
|
 Cable Assembly TNC jack B H Clamp RF Coax Connector US $9.99
|
 AMPHENOL RF ADAPTER 79825 BETWEEN SERIES N JACK TO TNC PLUG US $8.99
|
 SUHNER TNC Female Straight Jack 24TNC 50 2 31 133NE 2pcs US $4.99
|
 MA Com T35H45J022X RF Conn TNC Jack US $4.49
|
 Telegartner TNC Straight Jack Crimp J01011B0032 US $4.45
|
 coaxial adaptor BNC jack fem to TNC male plug US $4.35
|
 TNC Clamp Jack Coax connector for RG8 RG214LMR400 US $4.25
|
 2 Pcs TNC Male Plug to SMA Female Jack Straight RF Connector Adapter US $3.99
|
 N female jack to TNC male plug RF coaxial adapter connector US $2.50
|
 N male plug to RP TNC male jack RF adapter connector US $2.50
|
 N male plug to TNC female jack RF coaxial adapter connector US $2.50
|
 TNC Female Jack Straight Crimp For RG58 RG142 RG400 RG223 LMR195 RF Connector US $.99
|
BNC connector- what is it meant for?
BNC connector is a radio frequency and can be used as a wire line to join electronic tools. There are several versions of BNC connectors in the market at this time. Some of them are TNC and triaxial connectors to name a few.
The BNC connector also known as Bayonet Neill-Concelman or is a Radio Fundamental (RF) connector used as coaxial wire, is bascially adapted to connect a television or a radio and other radio-frequency band electronic tools. It is adapted in frequencies which are below 3 Ghz. The connector is adapted for RF signal connections. It is an option to the RCA connector when used for composite video on mainstream video devices, although various consumer electronic devices with RCA jacks are usually adapted with BNC-only video material via simple adapter. BNC connectors are commonly used on 10base2 thin Ethernet networks, both on cable interactions and network cards. The TNC (threaded) connector is mostly adapted for standard performances at higher frequencies than adapted with the BNC connector.
The name of the connector is derived from the collaboration of two things. They are listed as below:
1)The connecting applied science that has been employed behind the working of the connector
2)The names of the two inventors of the device. Those two inventors were Carl Concelman and Paul Neill, both of whom worked in the Bell Labs. Their main purpose was to develop a connector that adapted the principle of bayonet mount mechanism for locking.
The connector was a practical experiment, based on the research of Octavio M. Salati. Neill and Concelman perfected an earlier design and created a connector that has been used in several applications over the last several decades. It has been organized to process both the serial digital inter-face and the analog video broadcast. It is also capable of audio-interface managing transmissions.
As mentioned before the BNC connector is adapted for RF signal connections, in digital and analog video broadcast. Apart from that, it is useful for aviation electronics, amateur radio antenna connections and other types of electronic test equipment and so on. They exist in 50 and 75 ohm versions. During its early days, all the connectors were 50 ohm and were joined together with different power lines and the differences in the wires were not very noticeable at a lower frequency band. The newer ones, i.e., the 75 ohm category may be recognized by the absent or the reduced dielectric in the mating ends. The different wires can be mated with each other, although the differences may lead to signal reflections. The 75 ohm connectors are mostly adapted for DS3 Telco central office applications and are also adapted in video and 50 ohm is adapted for RF and data.
There are different types of connectors which are similar to BNC connector. They are briefly listed as follows:
A miniature version of BNC, known as TNC is also available in the market. It is superior to BNC and at microwave frequencies
Triaxial BNC connector, which was mostly used in NIM electronics. These have been replaced by LEMO connectors which permit higher density.
In USSR, the connectors were replicated as SR-75 which is Russian:-75 and SR-50 which is Russian: -50.
About the Author
Please visit these links for more information,
BNC Connector
and
Bnc Connector
Installation of TNC connector to a cable
You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.
Comments are closed.